-- *****************************************************************
-- CISCO-MEGACO-EXT-CAPABILITY
--
-- AGENT-CAPABILITIES MIB for CISCO-MEGACO-EXT-MIB
-- 
-- January 2004,  Margaret Hsieh
--
-- Copyright(c) 2004 by Cisco Systems, Inc.
--
-- *****************************************************************

CISCO-MEGACO-EXT-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
        MODULE-IDENTITY, Unsigned32, Integer32
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;


ciscoMegacoExtCapability MODULE-IDENTITY
    LAST-UPDATED "200401190000Z"
    ORGANIZATION "Cisco Systems, Inc."
    CONTACT-INFO
        "        Cisco Systems
                 Customer Service
        Postal: 170 W Tasman Drive
                San Jose, CA 95134
                USA
           Tel: +1 800 553-NETS
        E-mail: cs-voice-gateway@cisco.com"
    DESCRIPTION "The agent capabilities for CISCO-MEGACO-EXT-MIB." 
 
        REVISION "200401190000Z"
        DESCRIPTION
            "Initial version of this MIB module."
        ::= { ciscoAgentCapability 376 }


ciscoMegacoExtCapabilityV5R00 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 5.0.0"
STATUS          current
DESCRIPTION     "Megaco extension MIB capabilities for VXSM 
                 in release 5.0.0." 

    SUPPORTS        CISCO-MEGACO-EXT-MIB
    INCLUDES        { 
                      cmedxConfigGroup, 
                      cmedxStatsGroup, 
                      cmedxCallReduceRateGroup 
                    }

    VARIATION       cmedxGatewayIpAddressIndex
    SYNTAX          Unsigned32 (1..16)
    DESCRIPTION     "Only 16 gateway IP addresses are supported."

    VARIATION       cmedxGatewayMaxContexts
    SYNTAX          Unsigned32 (1..8064)
    DEFVAL          { 8064 }
    DESCRIPTION     "For OC3 card, the data range is (1..8064) and 
                     this object is default to 8064.
                     For T1/E1 card, the data range is (1..1536) and
                     this object is default to 1536."

    VARIATION       cmedxGatewayMaxTermsInContext
    SYNTAX          Unsigned32 (1..10)
    DEFVAL          { 10 }
    DESCRIPTION     "Support only up to 10 maximum terminations 
                     per context. Default is 10."

    VARIATION       cmedxGatewayDownServiceDelay
    SYNTAX          Integer32 (-1..0) 
    DESCRIPTION     "Support either 0 (forced out-of-service 
                     without delay) or -1 (graceful out-os-service 
                     after there is no active call)."

    VARIATION       cmedxGatewayActiveMgcDomain
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

    VARIATION       cmedxTermType
    SYNTAX          INTEGER {
                      pdnRtp      (3)
                    }
    DESCRIPTION     "Supports only pdnRtp(3) as termination type.
                     unknown(1), scn(2), pdnAtmAal1(4), and
                     pdnAtmAal2(5) are not supported."

    VARIATION       cmedxTermTypeProfileId
    SYNTAX          Unsigned32 (0..25)
    DESCRIPTION     "Only 25 H248 profiles can be supported."

    VARIATION       cmedxTermTypePkgIds
    SYNTAX          BITS {
                        pkgG   (0),
                        pkgDG  (4),
                        pkgCG  (6),
                        pkgNT  (9),
                        pkgRTP (10),
                        pkgAN  (12),
                        pkgSrvTn (15)
                    }
    DESCRIPTION     "Limited H248 packages are supported."

    VARIATION       cmedxProfileDtmfDigitOnDur
    SYNTAX          Unsigned32 (40..60000)
    DESCRIPTION     "Limited range values are supported ."

    VARIATION       cmedxProfileDtmfPauseDur
    SYNTAX          Unsigned32 (40..500)
    DESCRIPTION     "Supports limited data range."

    VARIATION       cmedxProfileCot1Frequency
    SYNTAX          Unsigned32 (1780 | 2010)
    DESCRIPTION     "Supports either 1780 or 2010."

    VARIATION       cmedxProfileCot2Frequency
    SYNTAX          Unsigned32 (1780 | 2010)
    DEFVAL          { 2010 }
    DESCRIPTION     "Supports either 1780 or 2010.
                     Default is 2010 since cmedxProfileRespCotMethod
                     is default to loopback."

    VARIATION       cmedxProfileInitiateCotDur
    SYNTAX          Unsigned32 (1..60000)
    DESCRIPTION     "Supports limited data range."

    VARIATION       cmedxProfileDetectLongDigitDur
    SYNTAX          Unsigned32 (40..60000)
    DEFVAL          { 1000 }
    DESCRIPTION     "Supports limited data range."

    VARIATION       cmedxProfileDetectLongCpToneDur
    SYNTAX          Unsigned32 (0..65535)
    DESCRIPTION     "Supports limited data range."

    VARIATION       cmedxProfilePlayCpToneInterDur
    SYNTAX          Unsigned32 (0..65535)
    DESCRIPTION     "Supports limited data range."

    VARIATION       cmedxProfileInGainControl
    SYNTAX          Integer32 (-4..14) 
    DESCRIPTION     "Supports limited data range."

    VARIATION       cmedxProfileVoIpVadTimer
    SYNTAX          Unsigned32 (250..500)
    DEFVAL          { 250 }
    DESCRIPTION     "250 milliseconds is the default value."

    VARIATION       cmedxProfileVoAal2VadTimer
    SYNTAX          Unsigned32 (250..500)
    DEFVAL          { 250 }
    DESCRIPTION     "250 milliseconds is the default value."

    VARIATION       cmedxProfileAtmAalPartialFill
    DESCRIPTION     "This object is applicable only when 
                     cmedxProfileAtmAalType is aal1(2)."

    VARIATION       cmedxProfileAtmAalType
    SYNTAX          INTEGER {
                         aal1Sdt (3),
                         aal2    (5)
                    } 
    DESCRIPTION     "Supports aal1Sdt(3) and aal2(5) only.
                     other(1), aal1(2), and aal1Udt (4) are
                     not supported."

    VARIATION       cmedxEphTermStatsType
    SYNTAX          INTEGER { all(1) }
    DESCRIPTION     "Supports all(1) only.
                     scn(2), pdnRtp(3), pdnAtmAal1(4), and pdnAtmAal2(5)
                     are not supported. "

    VARIATION       cmedxCRRNumOfLevel
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

    VARIATION       cmedxCallReduceRate
    ACCESS          not-implemented
    DESCRIPTION     "Not supported."

    ::= { ciscoMegacoExtCapability 1 }

END